380HB Steel Roller Thermal Laminator Machine 110V Conveyor Belt Winding

<p>Introduction:<br>The electric steel roller laminator is a special laminating machine for single-sided and double-sided laminating operation and is suitable for the industries of printing, packaging, manufacturing and so on. The laminator adopts the upgraded steel roller structure to ensure the high temperature resistance, high thermal conductivity, high hardness and high durability, and the service life is longer. The laminating machine is additionally equipped with a conveyor belt mechanism and a winding mechanism, making material feeding and discharging collection stable and orderly. The steel roller laminator is an ideal choice for customers with different laminating requirements.<br>Attention:<br>Always handle the laminator with care. Keep hands, long hair, loose clothing and other articles away from the rollers to avoid entanglement.<br>The temperature of the heat rollers can reach 130℃. Avoid touching the heat rollers during operation or shortly after power has been removed from the laminator.<br>Ensure the local power supply is consistent to the power supply indicated on the nameplate of the product.<br>When the machine is not in use, the upper roller should always be lifted and in the ‘Open’ position to prevent the bottom roller from deformation and damage.<br>Operation Method:<br>Turn on the Power switch, turn the Motion switch on the forward position and turn the control switch on the Foot control position.<br>Install the film rolls on the supporting rods and fix the film rolls at the center position, make sure the adhesive side of film to face away from rollers. The top and bottom film rolls should be aligned with each other if doing double-sided lamination, which prevents the exposed adhesive from making contact with the rollers. Install the winding roll on the winding supporting rod to collect the finished products.<br>Thread the film according to the Diagram.<br>Use a lead board to evenly push the film into the main roller nip. Pull the film by the pull rollers while pressing the Foot switch.<br>Set the laminating temperature to a certain degree (normally 70~100℃) according to the nature of film. You need to adjust it to get the good laminating result. Do not set the temperature over 115˚C to avoid damaging the laminator. After the work of laminating is finished, always lift up the upper steel roller to prevent the bottom roller from deformation and damage.<br>Clean any adhesive that may stick to the main rollers to prevent the adhesive from accumulation.<br><br>Parameter:<br>Maximum Laminating Width: 350MM(13.78IN)<br>Laminating Speed: 5M/MIN<br>Laminating Temperature: 70-130˚C<br>Power Supply: AC110V 50/60HZ 18A<br>Heating Power: Single Side 850W/Double Side 1800W<br>Heating Mode: Steel Roller Internal Heating<br>Laminating Mode: Single-Sided or Double-Sided Laminating<br>Operation Mode: Automatic Mode or Foot Switch Control<br>Paper Feeding Mode: Conveyor Belt<br>Paper Discharging Mode: Winding Collection<br>Product Size: 60x89x56CM(23.62x35.04x22.05 Inches)<br>Net Weight: 52KG(114.64LBS)<br><br>Items Included: 120121-EnzT<br>350MM/13" Electric Steel Roller Thermal Laminator 110V</p>

• The electric laminator adopts an upgraded steel roller to conduct efficient cold and heat laminating processes. The steel roller has the high stability, is resistant to deformation at the high temperature and pressure and can effectively remove the bubbles and wrinkles for the laminated materials. The pressure between rollers can be adjusted by the black knob to adapt to different materials to be laminated, so the practicability is greatly enhanced.
• The protective cover is of a hollowed structure and can safely protect the steel roller against damage while preventing the operator against scalds and accidents. Moreover, due to the hollowed structure, the operator can easily observe the roller state while effective heat dissipation is achieved. The steel roller can be lifted or pressed by the handle effortlessly, so the roller is further protected during use and after use.
• The temperature controller can achieve accurate control and adjustment of the laminating temperature to meet different laminating requirements. The actual temperature and set value can be clearly displayed through the digital panel. The operator can choose the single-side laminating mode or the double-sided laminating mode freely as needed, so the high adaptability and practicability are effectively ensured.
• The laminating speed, automatic/foot pedal control mode and rotating direction can be adjusted and controlled accurately through the corresponding switches, so the laminating operation for different materials is smoothly conducted, and different requirements for speed, mode and direction can be well met. The durable foot pedal is designed for manual control over laminating operation, and operation is easy and convenient.
• The large-sized conveyor belt is adopted to achieve smooth and stable feeding of the materials to be laminated, improving the feeding stability and precision and production efficiency, achieving continuous and automatic feeding and enhancing the applicability and flexibility. The paper baffle is designed for accurately limiting the materials and effectively avoiding deviation of the materials in the conveying process.